S. Markus, C. Tornow, S. Dieckhoff, M. Boustie, R. Ecault et al., Extended non-destructive testing of composite bonds, Presented at the SAE international conference, pp.2011-2012

M. Hoffmann, ENCOMB: investigation of quality assurance concepts for adhesive bonding of aircraft composite structures by extended NDT, Proceedings of the 3rd international EASN workshop on aerostructures, pp.9-11

E. October, . Association, P. Easn-tis, and . Di-milano,

, <www.encomb.eu>

M. S. , Detection of contaminants on polymer surfaces using laser induced breakdown spectroscopy (LIBS), vol.4

K. Albinsky, K. Brune, S. Dieckhoff, O. Hesebeck, U. Lommatzsch et al., Advances in bonded repair of CFRP aircraft structures by surface inspection, Presented at the 2nd international conference on advanced composite materials and technologies for aerospace applications, pp.11-14

F. Rock, N. Barsan, and U. Weimar, Electronic nose: current status and future trends, Chem Rev, vol.108, pp.705-730, 2008.

D. Palma, P. , D. Vito, S. Miglietta, M. Massera et al., CFRP surface contamination detection by an electronic nose device for quality assessment of adhesive bonds in lightweight aircraft structures, Presented at the 3rd international conference of engineering against failure (ICEAF III), pp.26-28

K. Brune, S. Dieckhoff, M. Hoffmann, L. Lima, D. Stübing et al., Pre-bond quality assurance of CFRP-surfaces by using optically stimulated electron emission, Presented at the Adhesion'13 conference

P. Malinowski, T. Wandowski, and W. Ostachowicz, Characterization of CFRP using piezoelectric transducer and laser vibrometry, Presented at the 10th international conference on damage assessment of structures, pp.8-10

P. Malinowski, K. I. Tserpes, T. Wandowski, L. Skarbek, and W. Ostachowicz, Composite bonds assessment using EMI technique, Presented at the 9th international workshop on structural health monitoring

P. Malinowski, T. Wandowski, and W. Ostachowicz, The use of electromechanical impedance conductance signatures for detection of weak adhesive bonds of carbon fibre-reinforced polymer, Struct Health Monit, vol.14, issue.4, pp.332-376, 2015.

B. Ehrhart, Quality assessment of CFRP bonded structures with active thermography techniques, Proceedings of the 5th international symposium on NDT in aerospace, 13th-15th November

L. P. Canal and V. Michaud, Micro-scale modeling of water diffusion in adhesive composite joints, Compos Struct, vol.111, pp.340-348, 2014.

L. P. Canal, R. Sarfaraz, G. Violakis, J. Botsis, V. Michaud et al., Monitoring strain gradients in adhesive composite joints by embedded fiber Bragg grating sensors, Compos Struct, vol.112, pp.241-248, 2014.

R. Sarfaraz, L. P. Canal, G. Violakis, J. Botsis, V. Michaud et al., An experimental-numerical investigation of hydrothermal response in adhesively bonded composite structures, Compos Part A, vol.73, pp.176-85, 2015.

G. Heichler, T. Grundner, and E. Rau, Ultrasonic frequency analysis, Presented at the 3rd international conference of engineering against failure (ICEAF III), pp.26-28

B. Campagne and H. Voillaume, Development of laser ultrasonics: application to complex shape aeronautical parts, Presented at the 1st international symposium on laser ultrasonics: science, technology and application, pp.16-24

R. Seyrkammer, R. Galos, B. Reitinger, J. Kasberger, and P. Burgholzer, NDT in composite bonding for aeronautic applications with laser ultrasound and infrared spectroscopy, Presented at the 3rd international conference of engineering against failure (ICEAF III), 2013.

A. J. Croxford, J. Potter, and K. Sapountzi, Ultrasonic array inspection of weak bonds, Presented at the 3rd international conference of engineering against failure (ICEAF III), pp.26-28

J. Yuan and V. Gupta, Measurement of interface strength by the modified laser spallation technique, J Appl Phys, vol.74, issue.4, pp.2388-410, 1993.

L. Berthe, M. Arrigoni, M. Boustie, J. P. Cuq-lelandais, C. Broussillou et al., State-of-the-art laser adhesion test (LASAT), Nondestr Test Eval, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00652904

R. Bossi, Laser bond testing, Mater Eval, vol.67, pp.819-846, 2009.

M. Perton, A. Blouin, and J. Monchalin, Adhesive bond testing of carbon-epoxy composites by laser shockwave, J Phys D Appl Phys, vol.44, p.34012, 2010.

R. Ecault, M. Boustie, F. Touchard, F. Pons, L. Berthe et al., A study of composite material damage induced by laser shock waves, Compos Part A, vol.44, pp.54-64, 2013.

R. Ecault, M. Boustie, L. Berthe, F. Touchard, L. Chocinski-arnault et al., Development of the laser shock wave adhesion test on bonded CFRP composite, Int J Struct Integrity, vol.5, issue.4, pp.253-61, 2014.

B. Ehrhart, R. Ecault, F. Touchard, M. Boustie, L. Berthe et al., Laser shock adhesion test for the control of weak adhesive bonded CFRP structures, Int J Adhes Adhes, vol.52, pp.57-65, 2014.

M. Illyas, C. Espinosa, F. Lachaud, and M. Salaün, Simulation of dynamic delamination and mode I energy dissipation, Presented at the 7th international LS-DYNA users conference

M. Ilyas, F. Lachaud, C. Espinosa, L. Michel, and M. Salaün, Dynamic delamination modeling of unidirectional composites by cohesive finite elements, Presented at the 16th Journée Nationales sur les composites (JNC16), pp.10-12
URL : https://hal.archives-ouvertes.fr/hal-00389645

S. Heimbs, S. Heller, and P. Middendorf, Simulation of low velocity impact on composite plates with compressive preload. Bamberg: LS-DYNA Anwenderforum, 2008.

. Ls-dyna, Keyword user's manual, vols. I and II. Version 971, 2007.

L. Manual, , 2006.

F. K. Chang and K. Y. Chang, A progressive damage model for laminated composites containing stress concentrations, J Compos Mater, vol.21, pp.834-55, 1987.

B. S. Thatte, G. S. Chandekar, A. D. Kelkar, and P. Chaphalkar, Studies on behavior of carbon and fiberglass epoxy composite laminates under low velocity impact loading using LS-DYNA, Presented at the 10th international LS-DYNA users' conference

R. Haynes, X. Tan, and E. Armanios, Effects of barely impact damage on bend-twist coupling, Presented at the 26th annual technical conference of ASC

A. Faggiani and B. G. Falzon, Predicting low-velocity impact damage on a stiffened composite panel, Compos A, vol.41, pp.737-786, 2010.

C. S. Lopes, P. P. Camanho, Z. Gürdal, P. Maimí, and E. V. González, Low-velocity impact damage on dispersed stacking sequence laminates. Part II: numerical simulations, Compos Sci Technol, vol.69, pp.937-984, 2009.

M. Anghileri, L. Castelletti, A. Milanese, and A. Semboloni, Modeling hailstone impact onto composite material panel under a multi-axial state of stress, Presented at the 6th European LS-DYNA users' conference

H. D. Espinosa, S. Dwivedi, and H. Lu, Modeling impact induced delamination of woven fiber reinforced composites with contact/cohesive laws, Comput Methods Appl Mech Eng, vol.183, pp.259-90, 2000.

A. Yoshimura, K. Nagakura, T. Okabe, H. Kusano, M. Yamada et al., 3D simulation of high-velocity impact damage progress in the CFRP laminates, Presented at the 15th European conference on composite materials (ECCM15)

O. Allix, M. Dommanget, M. Gratton, and P. Héreil, A multi-scale approach for the response of a 3D carbon/carbon composite under shock loading, published, Compos Sci Technol, vol.61, pp.409-424, 2001.

C. Yen, Ballistic impact modeling of composite materials, Presented at the 7th international LS-DYNA users conference

L. J. Deka and U. K. Vaidya, LS-DYNA impact simulation of composite sandwich structures with balsa wood core, Presented at the 10th international LS-DYNA users' conference

A. A. Lukyanov, An equation of state of a carbon-fibre epoxy composite under shock loading, Eur Phys J, vol.74, pp.35-45, 2010.

R. Vignjevic, N. Djordjevic, D. Vuyst, and T. , Progressive damage in woven CFRP in presence of shock wave, Presented at the 15th European conference on composite materials (ECCM15)

M. Wicklein, S. Ryan, D. M. White, and R. A. Clegg, Hypervelocity impact on CFRP: testing, material modelling, and numerical simulation, published, Int J Impact Eng, vol.35, pp.1861-1870, 2008.

S. Ryan, M. Wicklein, A. Mouritz, W. Riedel, F. Schäfer et al., Theoretical prediction of dynamic composite material properties for hypervelocity impact simulations, published, Int J Impact Eng, vol.36, pp.899-912, 2009.

R. Fabbro, J. Fournier, P. Ballard, D. Devaux, and J. Virmont, Physical study of laser produced plasma in confined geometry, J Appl Phys, vol.68, issue.2, pp.775-84, 1990.

L. Berthe, R. Fabbro, P. Peyre, L. Tollier, and E. Bartnicki, Shock waves from a water confined laser-generated plasma, J Appl Phys, vol.82, issue.6, pp.2826-2858, 1997.

T. Antoun, L. Seaman, and D. R. Curran, Spall fracture, 2002.

L. Tollier, R. Fabbro, and E. Bartnicki, Study of laser-driven spallation process by VISAR interferometry technique. I. Laser-shock characterization, J Appl Phys, vol.83, issue.3, p.1224, 1998.

J. Cuq-lelandais, Etude du comportement dynamique de matériaux sous choc laser sub-picoseconde

, Ecole Nationale Supérieure de Mécanique et d'Aérotechnique, Ecole doctorale SIMMEA, 2010.

D. P. Dandekar, C. A. Hall, L. C. Chhabildas, and W. D. Reinhart, Shock response of a glassfiber-reinforced polymer composite, published, Compos Struct, vol.61, pp.51-60, 2003.

R. Ecault, L. Berthe, F. Touchard, M. Boustie, E. Lescoute et al., Experimental and numerical investigations of shock and shear waves propagation induced by femtosecond laser irradiation in epoxy resins, J Phys D Appl Phys, vol.48, p.95501, 2015.